Beskrivning
1. Produktbeskrivning
BMS Product feature:
About the battery BMS/PCB/PCM Function: Separate Version : separate port for charge/discharge We can customize any PCB from 1S to 35S lithium batteries with different current.
|
- Description of application effect
(Batterihanteringssystem) BMS can extend battery life and make battery work safely.
This model can be used for solar, LED lights, Emergency lights, Digital Equipment, etc.electric scooter,e-bike,tourisr
sightseeing vehicle,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……
sightseeing vehicle,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……

About your products,just tell us the relative voltage/cells/current A or equipment etc,we will help to recommend the most suitable products for you.

| Mode | LWS-30S320A-353(24S) |
| PCM Size | L279*W200*T38 mm |
| battery series | 4S-30S Available |
| working current | 320A Available |
| Ansökan | LED lights, Emergency lights, Digital Equipment, etc |
| Prov | available |

Wiring:
1. First connect the B- of the BMS to the total negative pole of the battery pack;
3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
1. First connect the B- of the BMS to the total negative pole of the battery pack;
2.The cable starts from the thin black one connecting B-, the second red wire connects the positive pole of the first string of batteries, and the next string is connected in turn to positive pole of the battery,B-,B1,B2……B24; then insert the cable into the BMS;
(The maximum number of strings is 4-30 strings, the example picture is 24 strings) (Please weld the wires in order and avoid pseudo solder joints.)3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
| Shenzhen Li-ion Battery Bodyguard Technology Co.,LTD | |||
| PCM Specifications For 76.8V(24S)LiFePo4 Battery Packs | |||
| Modell: LWS-30S320A-353(24S) | |||
| Inga. | Test item | Criterion | |
| 1 | Spänning | Charging voltage | 86.4V±0.05V |
| Balance voltage for single cell | 3.6±0.025V | ||
| 2 | Current | Balance current for single cell | 35±5mA |
| Current consumption | ≤25uA | ||
| Max continuous charging current | 250A | ||
| Max continuous Discharging current | 250A | ||
| 3 | Over charge Protection | Over charge detection voltage for single cell | 3.9±0.025V |
| Over charge detection delay time | 0.5S-1.5S | ||
| Over charge release voltage for single cell | 3.8±0.05V | ||
| 4 | Over discharge protection | Over discharge detection voltage for single cell | 2.50V±0.0625V |
| Over discharge detection delay time | 50mS-150mS | ||
| Over discharge release voltage for single cell | 3.00±0.075V | ||
| 5 | Over current protection | Over current detection voltage | 100±25mv |
| Over current detection current | 500A±50A | ||
| Detection delay time | 1000mS-1600mS | ||
| Release condition | Cut load | ||
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-500uS | ||
| Release condition | Cut load | ||
| 7 | Resistance | Protection circuitry(MOSFET) | ≤20mΩ |
| 8 | Temperatur | Operating Temperature Range | -20~+70ºC |
| Storage Temperature Range | -40~+125ºC | ||



3. FAQ
|





