Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters

Modell nr.
GW-23GL-ASC

Output Power
23dBm

Gain
75dB

Coverage
800-1500sqm

Ansökan
Office,Basement, Hotel

OEM
Customized Frequency,Logotyp,Colors and Package

Produktnamn
Cellphone Signal Repeater

Särdrag
31dB Gain Adjustable with DIP Switch,AGC,Alc;

Transportpaket
Neutral Packing

Specifikation
CE, RoHS

Varumärke
Greetwin

Ursprung
Shenzhen

HS-kod
8543709200

Produktionskapacitet
2, 000PCS/Månad

Beskrivning

Double Band Signal Repeater 23dBm GSM 900MHz LTE 2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Booster

A cell phone reception booster is generally a repeater system that involves the amplifier adding gain or power to the reception in various directions. Even for a cheap cell phone signal booster, maximum gain differs by application. The work of an outside antenna is to both receive and transmit signals to a cellular tower with enhanced power and sensitivity. Usually, the dB gain is never below 7 dB and can be over 10 dB gain. The system’s elements conduit is the coaxial cable. It is also a factor in transmission loss.

Produktbeskrivning

Production Information

Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters
Parameter:

Frequency Range Uplink Downlink
GSM 900Mhz 890-915Mhz 935-960Mhz
LTE 2600Mhz 2500-2570MHz 2620-2690MHz
Gain 70dB±2db 75dB±2db
Output Power 20dBm±2dbm 23dBm±2dbm
Bandwidth Wide Band
Manual Gain Control 31dB
ALC >25dB
Ripple in-band ≤ 8dB
Return loss ≤ -10dB
Noise Figure ≤ 6dB
Spurious Emission
&Intermodulation
9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Time Delay ≤ 1.5 μs
Frequency stability ≤ 0.01ppm
MTBF > 50000 timmar
Strömförsörjning AC100-240V,DC9V/5A
Power LED Power indicator
Alarm LED Red Autoexcitation or High Power
Green Standard
Mechanical Specification
RF Connector N-Female
Switch Power SwitchManual Gain Control Switch
Kyl Heatsink Convection cooling
Impedance 50 ohm
Humidity < 90%
Driftstemperatur -10°C~55°C
Environment Conditions IP40
Storlek 250mm*170mm*53mm
Vikt < 3.5Kg
Drag:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 800~1500m² Without block or obstruction.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G, etc

Fördelar:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LCD panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.

Standardpaket:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

Förbindelse:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.

Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please
Kontakt us with more details.

Q2.Delivery Date&Ledtid

Quantity Lead time Delivery to American/Middle East/Asia/Europe
<20 st 3-5 business days 3-7 business days by DHL
5-7 business days by FedEx/UPS
20-100 st 7-15 business days
>100 st 15-24 business days

*Click it to get the sample.

Q3. Can I customize frequencies?

Ja, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.

Q4. What should I do if I don’t know about frequency in my country?

Please feel free to Contact us with your inquiry, we will find the frequency you need and address your problems.

Other Signal Repeater

More signal repeater please CLICK it!
Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters