Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters

Модель №.
GW-23GL-ASC

Output Power
23dBm

Gain
75дБ

Coverage
800-1500sqm

Приложение
Office,Basement, Hotel

OEM
Customized Frequency,Логотип,Colors and Package

Название продукта
Cellphone Signal Repeater

Особенность
31dB Gain Adjustable with DIP Switch,AGC,Alc;

Транспортный пакет
Neutral Packing

Технические характеристики
CE, РоХС

Товарный знак
Greetwin

Источник
Шэньчжэнь

Код ТН ВЭД
8543709200

Производственная мощность
2, 000ПК/месяц

Описание

Double Band Signal Repeater 23dBm GSM 900MHz LTE 2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Booster

A cell phone reception booster is generally a repeater system that involves the amplifier adding gain or power to the reception in various directions. Even for a cheap cell phone signal booster, maximum gain differs by application. The work of an outside antenna is to both receive and transmit signals to a cellular tower with enhanced power and sensitivity. Usually, the dB gain is never below 7 dB and can be over 10 dB gain. The system’s elements conduit is the coaxial cable. It is also a factor in transmission loss.

Описание продукта

Production Information

Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters
Parameter:

Frequency Range Uplink Downlink
GSM 900Mhz 890-915Mhz 935-960Mhz
LTE 2600Mhz 2500-2570МГц 2620-2690МГц
Gain 70dB±2db 75dB±2db
Output Power 20dBm±2dbm 23dBm±2dbm
Bandwidth Wide Band
Manual Gain Control 31дБ
ALC >25дБ
Ripple in-band ≤ 8dB
Return loss ≤ -10dB
Noise Figure ≤ 6dB
Spurious Emission
&Intermodulation
9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Time Delay ≤ 1.5 μs
Frequency stability ≤ 0.01ppm
MTBF > 50000 часы
Источник питания AC100-240V,DC9V/5A
Power LED Power indicator
Alarm LED Красный Autoexcitation or High Power
Green Стандартный
Mechanical Specification
RF Connector N-Female
Switch Power SwitchManual Gain Control Switch
Cooling Heatsink Convection cooling
Impedance 50 ом
Влажность < 90%
Рабочая температура -10°C~55°C
Environment Conditions IP40
Размер 250mm*170mm*53mm
Масса < 3.5Кг
Функции:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 800~1500m² Without block or obstruction.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, ПКС, WCDMA, LTE 4G, так далее

Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LCD panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.

Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, так далее) 1ПКС
3) Installation kit 1PCS
4) User manual 1PCS

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700МГц)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700МГц)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
А. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
С. Place the booster on and fasten it.
Д. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

Connection:
А. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
С. DC IN connected with Power adaptor.

Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters

Вопросы-Ответы

Q1.Payment Method

Т/Т, Western Union, ПайПал, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please
Контакт us with more details.

Q2.Delivery Date&Время выполнения

Quantity Lead time Delivery to American/Middle East/Asia/Europe
<20 шт. 3-5 business days 3-7 business days by DHL
5-7 business days by FedEx/UPS
20-100 шт. 7-15 business days
>100 шт. 15-24 business days

*Click it to get the sample.

Q3. Can I customize frequencies?

да, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,так далее.

Q4. What should I do if I don’t know about frequency in my country?

Please feel free to Сontact us with your inquiry, we will find the frequency you need and address your problems.

Other Signal Repeater

More signal repeater please CLICK it!
Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters

Профиль компании

360° Full View of Factory Evaluation

Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters

Ascom Signal Repeater 23dBm GSM 900MHz LTE2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Repeaters