Описание
Описание:
CAPG Cu-Al Parallel Groove Clamp is used for the Non-bearing connection and offset of aluminum
stranded wire, aluminum stranded wire, it’s used with insulatin cover for the effect of protective
and insulation.
CAPG Cu-Al Parallel Groove Clamp is used for the Non-bearing connection and offset of aluminum
stranded wire, aluminum stranded wire, it’s used with insulatin cover for the effect of protective
and insulation.
Raw material:
Тело:High strength, corrosion resistant aluminium alloy and forging bimetal
Readle bar: aluminium alloy
Spring washer/ gasket: iron DIN6796. corrosion resistant
Bolt :iron8.8, DIN933. Dacromet plating
Nut:iron 8, DIN934, Dacromet plating
The bolt and nut can change to stainless steel material as customer’s requirement.
Structural features:
1.choosing the high strength, corrosion resistant aluminium alloy and forging bimetal
2.tooth type, small contact resistance, reliable connection
3.siamesed parts, will not fall any part during assembly
4.hold a large area of arc, the contact surface will be more close which will improve the grip strength
between clamps and conductors.
Technical data
| Модель | Conductor Cross-section (mm2) | Bolts |
| CAPG-A1 | Cu 6-50 Ал 16-70 | 1×M8×40 |
| CAPG-A2 | Cu 10-95 Ал 25-150 | 1×M8×45 |
| CAPG-B1 | Cu 6-50 Ал 16-70 | 2×M8×45 |
| CAPG-B2 | Cu 10-95 Ал 25-150 | 2×M8×50 |
| CAPG-B3 | Cu 25-185 Ал 35-200 | 2×M10×60 |
| CAPG-C1 | Cu 6-50 Ал 16-70 | 3×M8×45 |
| CAPG-C2 | Cu 10-95 Ал 25-150 | 3×M8×50 |
| CAPG-C3 | Cu 25-185 Ал 35-240 | 3×M10×60 |
| CAPG-C4 | Cu 35-240 Ал 35-300 | 3×M10×70 |
