10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Модель №.
SDT-10KW

Output Type
Triple

Circuit Topologies
Full-Bridge Type

Nature of Wave String
Sine Wave Inverter

Type
AC-DC-AC

Isolation Mode
Low Frequency Transformer

Efficiency
>94%

Отображать
LCD+LED

Start Mode
Step Down Voltage Start and VFD

Protection
Over Load, Short Circut, Under/ Overvoltage

DC Input
Необязательный

Monitoring(Необязательный)
RS485 Communication Port

Транспортный пакет
Wooden Box Packing with Pallet

Технические характеристики
550*550*860мм(Width*Depth*Height)

Товарный знак
SANDI

Источник
Чжэцзян, Китай

Код ТН ВЭД
8504403090

Производственная мощность
2000ПК/месяц

Описание

Описание продукта

10kw-20kw 1 phase 208Vac 60Hz to 1 phase 230Vac 50Hz power converter
10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Power Phase Converter IntroductionSANDI SDT series Power Phase converter is one of the most advanced AC to AC conversion products in the world which can convert ordinary single-phase power to industrial three-phase power or converter 50hz to 60hz or 60hz to 50hz or converter voltage.It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, highefficiency, low no-load loss and no pollution.
The converter can supply AC power to all kinds of electric equipment, electric motors, pump, compressor, and other industrial power supply. Applicable to all types of load.

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Technical Features

1) The input voltage, output voltage, frequency and phase can be custom made.

2) Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. VFD is especially used for taking 3 phase inductive load more easily. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

3) Output AC Power is suitable for all types of home appliances,electric tools, electric motors etc.

4) Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency andstable performance. It with powerful protection function for short circuit, over load, over temperature. Service life can reach 15-20 годы.

5) Pure sine wave output. with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.

6) Adopted low frequency isolated transformer, safe and reliable, single phase input power is completely isolated from three phase output power, high conversion efficiency, high instantaneous power, stable performance and low load loss.

7) Adopts new magnetism material, largely reduce machine consumption, making efficiency maximum up to 98%.

8) Adopts America DSP chip, safe and reliable.

9) Adopts black pure aluminum radiator, which confirms the best radiating performance

10) Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the back end devices

11) Intelligent fan speed control system, low no-load loss

12) LCD display, high efficiency, easy installation

13) The output frequency 50Hz/60Hz can be set

Product Parameters
Модель SDT-10КВт
Isolation mode Low Frequency Transformer
AC Вход Номинальное напряжение (ВAC) 208VAC(L to N 208V)
Rated current (А) 48.1А
Выход переменного тока Rated output power 10КВт
Output waveform Pure Sine Wave
Rated Voltage 230VAC±3%
Phases Single phase + N
Rated current (А) 43.5А(phase current)
Частота 50Hz
Power Factor (PF) >0.99
converter Efficiency >92%
Отображать ЖК -дисплей
Voltage Accuracy Load Balancing ≤1%, Unbalance Load ≤5%
Waveform distortion rate (THD) ≤2%(Linear load), ≤3%(Nonlinear load)
Dynamic Response
(0 к 100% load)
5%, ≤50ms(load 0~100%)
Running mode Working continuously
Electrical insulation properties 2000Vac, 1 Minute
Protection Function Overload Ability 120%, 35 секунды
Protection Input reverse polarity, under voltage, over voltage, output over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection Нет automatic recovery, need to restart the machine
Working Environment Шум ( 1 meter) ≤50dB
Степень защиты IP20(indoor)
Working Altitude (м) ≤2000
Working temperature -25~+55ºC
relative humidity 0~90%,non-condensing
Mechanical Дimension Depth* Width * Высота 680x482x300мм
Масса (Кг) 110Кг

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Наши преимущества

Our converter with many advantages on hardware and powerful functions, such as:
1. Adopted efficient Mitsubishi IPM intelligent module, with higher efficiency > 94% and stable performance.
2. It with powerful protection function for short circuit, over load, over temperature which is more safe and reliable.
3. Longer serive life > 15 годы. Modular structure design very simple and easy for maintenance.
4. Built in low frequency isolation transformer, 100% full power output, can work 24h*7, suitable for all kinds of AC load.
5. Two kinds of start mode: Variable frequency start and Step down voltage start, with stronger capacity to drive inductive load.
6. Big LCD display, the output voltage and output frequency all can be set.
10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Подробные фотографии

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Сертификаты

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Упаковка & Перевозки

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

Вопросы-Ответы

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter

SANDI Main Products

SANDI Main Products

10kw-20kw 1 Phase 208VAC 60Hz to 1 Phase 230VAC 50Hz Power Converter