Descrição
Industrial Powerline Ethernet Bridge
Wide Voltage(150V-630V)
WD-1001M-DIN(HV3)
Overview
WD-1001M-DIN(HV3) industrial powerline ethernet bridge is an industrial powerline communication product developed by Kunshan Wondertek Technology Co., Ltda. The product adopts the ITU-T G.9960 G.hn communication protocol standard, has been widely used in intelligent manufacturing, intelligent building, intelligent city street lamp, intelligent electricity meter, solar panel monitoring, communication in dangerous environment, maritime applications, automotive applications, aerospace applications, railway, mining, intelligent storage, intelligent sorting, Automatic garage and other wired or sliding contact line and many other sites.
Packet loss:≤0.1%(100M,load 70%)
Support 7*24 hours all weather operation;
Hardware watch dog function;
Low delay communication
Wide voltage input
NDIM (Near Field Interference)
3.1 Technical parameters
- support G.hn protocol standard.
- Industrial DIN standard installation or fixed installation method.
- rate adaptive.
3.2 UMAdministrative
- Remote Firmware Update (TR069).
- 802.3D Ethernet Bridge.
- 802.1Q VLAN.
- Quality of Service(QoS) .
- IGMO(IPv4)Snooping&MLD(IPv6)Snooping
3.3 The work environment
- The working temperature of the working environment is -40ºC-85ºC.
- Operating environment Operating temperature :10%-85% non-condensing state Preservation humidity 5%-90% non-condensing state.
3.4 Design criteria
- ITU-T G.9960
- IEC 60529
- IEC 50022
- IEC 60068-2-6
3.5 Especificação
| Interface | 1*LAN 10/100/1000Base-TX self Adaption RJ45,MDI/MDX |
| Operating voltage range | AC150-630V/DC200-890V |
| CONDUZIU display Light | Ethernet PLC Poder |
| Transfer frequency | 2-50MHz and MIMO |
| Protocol(PHY) | ITU-T G.9960 (G.hn) IEEE802.3,IEEE802.3x, IEEE802.3u |
| Security | 128-AES |
| Transfer rate(PHY) | 1000Mbps |
| Number of each Group | 7 |
| Modulation | OFDM |
| Effective transfer rate | TCP/IP 500Mbps |
| Manageability | Remote Firmware update,support TR-069(optional) |
| 802.1D Ethernet Bridge | |
| 802.1Q VLAN | |
| Quality of Service(QoS) | |
| Operating temperature | -40C-85C |
| Peso | About 0.30kg |
| Operating environment | Operating humidity:10%-85%(no condense) Storage humidity: 5%-90% (no condense) |
| Certificação | FCC,CE class B,WEEE,RoHS |
| Transmission distance | 800eu Máx. |
| Transmission lines | Three-wire transmission MIMO Mode |
3.6 Immunity Of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 é.
According to B/T 17626.2-2006.
3.7 Immunity of Electrical Fast Transient EUmpulse Group(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5KHz;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
3.8 Anti EUnterference of Surge EUmpact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
3.9 Anti- Vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
4. Connection Topology Diagram
5. Mounting Dimension Drawing
