Automatic Sectional Garage Door Opener

Features:
1. Electronic limit switches
2. Automatic safety reverse
3. Manual release in case of power failure
4. Chain drive, belt drive, low noise
5. Power to lift the heaviest residential door.
6. Provides light for safe entry into the garage and to control lights from inside of garage and car
7. Provides a smoother operation and results in less wear and tear on the door, extending its life
8. Backup battery function (optional)
9. For security, rolling code format changes entry code each time remote is used
10. LCD console to operate the garage door opener, shows time

TECHNICAL DATA:
 
INPUT VOLTAGE:           220/230V AC 50Hz
                           (110v AC 60Hz or 127V AC 60Hz available on request)
                            Single Phase
                            Current Required       1Amp
 
TRANSFORMER SEPC:         Primary Voltage       220/230V AC  
WORKING CIRCUMSTANCE:   TEMPERATURE:      -20ºC~55ºC
                                   RELATIVE HUMIDITY:   <90%
MOTOR SPEC:                      Motor Type              Permanent Magnet D.C. Motor
                                   Voltage                  24V DC
                                   Torque                  150 kg.cm at 4 Amps
CONTROL BOARD SPEC:             Relay Contact Rating      30 Amp / 30V DC
Relay Coil Voltage        24V DC
Control Board Voltage     24V DC / 5V DC
Light Glove Voltage       220v ac 15 watts Max.
Receiver specification      Receiver type    FSK AM
(Built-in) RF Frequency                    433.92MHz
                       Code Storage Capacity 20Different codes
                       Control distance 50m max.
TRANSMITTER SPEC                 Carrier Frequency        433.92MHz
Current Consumption     50mA (approx)
Battery Voltage          12 Volts A23 battery
Coding Format          Hopping Code(7.38*10¹⁹ Combinations)