Beschrijving
High Ripple 400V/ 1/1.5/1.8/2.2/2.7/3.3/4.7/5.6/6.8/8.2/10/12/15/22/33/47/56/68/100UF Aluminum Electrolytic Capacitor
Type Radial
Guaranteed life: +105ºC, 8000 uur.
High frequency and low ESR products.
Especially suitable for power supply LED
Dissipation Factor (tanδ)
Guaranteed life: +105ºC, 8000 uur.
High frequency and low ESR products.
Especially suitable for power supply LED
Characteristics
Bedrijfstemperatuurbereik: -40~+105ºC
Rated Voltage Range: 6.30~160Vdc
Capacitance Tolerance: ±20% (20ºC, 120Hz)
Leakage Current: Reading when rated voltage is applied for 2 minutes
(Nominal Capacitance) (μF)
Nominale spanning (V)
Dissipation Factor (tanδ)
| Nominale spanning (V) | 200 | 250v | 400v | 450v | 500v |
| tanδ (max) | 0.15 | 0.15 | 0.20 | 0.20 | 0.24 |
| Nominale spanning (V) | 120 | 10v | 16v | 25v | 50v | 100v | 160v |
| tanδ (max) | 0.12 | 0.18 | 0.16 | 0.12 | 0.08 | 0.08 | 0.15 |
When niminal capacitance execeeds 1000μF, add 0.02 to the value fir each 1000μF increase.
Low Temperature Stability
| Nominale spanning | 50 | 63 | 100 | 120Hz |
| Z-25ºC / Z25ºC | 2 | 2 | 2 | 120Hz |
| Z-40ºC / Z25ºC | 3 | 3 | 3 | 120Hz |
| Load life test | In the 105C environment, apply the rated voltage and superimpose the rated ripple current (the peak value of the returned voltage does not exceed the rated working voltage), continuous After loading the rated voltage for 10,000 uur, when it is restored to 25°C for measurement, the following items should be met. |
|
| Capacitance Change | Within ±25% of the initial value | |
| Capacitance Factor | Not more than 200% of the specified value | |
| Leakage Current | Not more than the specified value | |
| Shelf life test | After storing for 1000 hours in an environment of 105 degrees, when it is restored to 25 degrees for measurement, the following items should be met. | |
| Capacitance Change | Within ±25% of the initial value | |
| Dissipation Factor | Not more than 200% of the specified value | |
| Leakage Current | Not more than the specified value | |
Ripple current correction factor
| Hz | 120 | 1K | 10K | 100K |
| 1~200 | 0.4 | 0.75 | 0.9 | 1.0 |
| 220~680 | 0.5 | 0.85 | 0.94 | 1.0 |
| 680~1000 | 0.6 | 0.87 | 0.95 | 1.0 |
Type CD11GA SERIES
Case Size, Impendence (25ºC 100Khz)& Rated Ripple Current (105ºC, 100Khz)
| Spanning ( V ) | 200 | 250 | 350 | ||||||
| Capaciteit) (μF) | Size DxL(mm) | Impedantie (Ωmax) | Ripple current (mArms) | Size DxL(mm) | Impedantie (Ωmax) | Ripple current (mArms) | Size DxL(mm) | Impedantie (Ωmax) | Ripple current (mArms) |
| 2.2 | 6.3×9 | 0.15 | 50 | 6.3×9 | 0.15 | 48 | 8×12 | 0.20 | 65 |
| 2.7 | 6.3×11 | 0.15 | 55 | 6.3×11 | 0.15 | 52 | 8×12 | 0.2 | 68 |
| 3.3 | 6.3×11 | 0.15 | 68 | 6.3×11 | 0.15 | 65 | 8×12 | 0.2 | 75 |
| 4.7 | 8×12 | 0.15 | 100 | 8×12 | 0.15 | 120 | 8×12 | 0.2 | 108 |
| 5.6 | 8×12 | 0.15 | 118 | 8×12 | 0.15 | 130 | 8x16 | 0.2 | 122 |
| 6.8 | 8×12 | 0.15 | 125 | 8×12 | 0.15 | 160 | 8x20 | 0.2 | 140 |
| 8.2 | 8×12 | 0.15 | 142 | 8×16 | 0.15 | 180 | 8x20 | 0.20 | 160 |
| 10 | 8×12 | 0.15 | 155 | 10×13 | 0.15 | 185 | 10x20 | 0.20 | 195 |
| 15 | 8×16 | 0.14 | 225 | 10×13 | 0.15 | 225 | 10x20 | 0.20 | 245 |
| 22 | 10×16 | 0.15 | 240 | 10×16 | 0.15 | 300 | 13×20 | 0.20 | 305 |
| 33 | 10×20 | 0.15 | 320 | 13×18 | 0.15 | 375 | 16×20 | 0.20 | 390 |
| 47 | 13x20 | 0.15 | 430 | 13×20 | 0.15 | 410 | 16×25 | 0.20 | 480 |
| 68 | 16x20 | 0.15 | 490 | 13×25 | 0.15 | 540 | 18×25 | 0.20 | 570 |
| 82 | 16x20 | 0.15 | 520 | 18×25 | 0.15 | 825 | |||
| 100 | 16x25 | 0.15 | 690 | 18×30 | 0.15 | 900 | 18×32 | 0.20 |
750 |
| 150 | 16x30 | 0.15 | 790 | ||||||
