説明
形: Polygonal
色: Request
Surface treatment: Hot Dip Galvanized
高さ: 2m-50m Thickness: 2.5mm-30mm
証明書: ISO9001:2008
アイテム: Residential Light Poles
Ground Mounted: Anchor Bolt
Welding: AWS D 1.1
This is the description of Galvanized steel poles uses for electrical transmission line
-Original design and manufacture in accordance with domestic or ANSI/TIA-222-G
-Galvanization: ISO 1461/ASTM A123
-材料: ASTM A572, S355, Q345/Q235, 等
-Material Code: GB/T1591-2008, GB/T700-2006
-Reliable qualification (ISO9001:2000)
-Excellent service including supervision and supplementary components
-Custom designs and operational decorative solutions
-Excellent service including supervision and supplementary components
To design in accordance with PLS software, we need following design parameters:
1. The operational wind speed of the region where the Tower will be use?
2. The Antennas loading of the Tower and at what height ?
3. The Total height of the Tower itself.
| 高さ | From 9 meter to 100 meter |
| Suit for | Electric Power Transmission and Distribution |
| 形 | Polygonal or Conical |
| 材料 | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
| Power Capacity | 10kV to 220kV |
| Tolerance of the dimension | According to client’s requirement. |
| Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
| Joint of Poles | Slip joint, flanged connected |
| 標準 | ISO 9001:2008 |
| Length of per section | Within 14 meter once forming |
| Welding Standard | AWS (American Welding Society ) D 1.1 |
| Thickness | 1 mmto 36mm |
| Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
| Packages | Packing with plastic paper or according to client’s request. |
| 製品名 | galvanized steel poles towers uses for electrical line |
| Length of per section | Within 14m once forming without slip joint |
| Minimum ultimate tensile strength | 490mpa |
| Max ultimate tensile strengt | 620mpa |
