GPS & Glonass Engine Module with 1PPS Gnss Module

モデル番号.
DM1513-G

Chip Set
Mediatek Mt3333

パッケージ
Plastic Tray , Paper Cartoon

Communication Type
Uart/Ttl

PPS
1PPS

輸送パッケージ
Plastic Tray, Paper Cartoon

仕様
Module Size: 15.2×13.0x6.4mm

商標
DeliNComm

中国

生産能力
80000PCS/日

説明

General 説明
The Delin Comm DM1513-G is a complete GPS&GLONASS engine module that features super
sensitivity , ultra low power and small form factor. The GPS&GLONASS signal is applied to the antenna input
of module , and a complete serial data message with position, velocity and time information is presented at the
serial interface with NMEA protocol or custom protocol .

Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons そして dense
foliage environment where the GPS&GLONASS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems.


Applications

  1. LBS (Location Based Service)
  2. PND (Portable Navigation Device)
  3. Vehicle navigation system
  4. Mobile phone

特徴

  1. Build on high performance, low-power MediaTek MT3333 chip set
  2. Ultra high Track sensitivity: -165dBm
  3. Extremely fast TTFF at low signal level
  4. Built in high gain LNA
  5. Low power consumption: マックス [email protected]
  6. NMEA-0183 compliant protocol or custom protocol
  7. Operating voltage: 2.8V to 4.3V
  8. Operating temperature range:-40to85ºC
  9. Patch Antenna サイズ: 12x12x4mm
  10. Module Size: 15.2×13.0x6.4m
  11. Communication type: UART/TTL
  12. RoHS compliant (Lead-free)

Key Feature

Parameter 仕様
Power Supply
  • Supply voltage: 2.8V~4.3V Typical: 3.3V
Power Consumption
  • Acquisition: 40mA @VCC=VBAT=3.3V
  • Tracking: 35mA @VCC=VBAT=3.3V
  • Standby: 2.0mA @VCC=VBAT=3.3V
  • Backup: 15uA @VBAT=3.3V
Receiver Type
  • Code 66 search channels, 22 synchronous tracking channels
  • GPS&&QZSS L1 1575.42MHz C/A , GLONASS L1OF 1602MHz SBAS: WAAS, EGNOS, MSAS, GAGAN
Sensitivity
  • Tracking: -165dBm
  • Re-acquisition: -156dBm
  • Acquisition: -148dBm
TTFF (EASY enabled)
  • Cold start: 15s typ @-130dBm
  • Warm start: 5s typ @-130dBm
  • Hot start : 1s typ @-130dBm
TTFF (EASY disabled)
  • Cold start(Autonomous): 35s typ @-130dBm
  • Warm start (Autonomous): 30s typ @-130dBm
  • Hot start (Autonomous): 1s typ @-130dBm
Horizontal Position Accuracy (Autonomous)
  • <2.5m CEP @-130 dBm
Max Update Rate
  • Up to 10Hz,1Hz by fault
Accuracy of 1PPS Signal
  • Typical accuracy: ±10ns, Time pulse width: 100ms
Acceleration Accuracy
  • Without aid: 0.1m/s²
Dynamic Performance
  • Maximum altitude: 18,000m
  • Maximum velocity: 515m/s
  • Acceleration: 4G

UART Port

  • UART Port: TXD and RXD
  • Supports baud rate from 4800bps to 115200bps, 9600bps by default
  • UART port is used for NMEA output, MTK proprietary
  • commands input and firmware upgrade
Temperature Range
  • Normal operation: -40°C ~ +85°C
  • Storage temperature: -45°C ~ +125°C
Physical Characteristics
  • サイズ: 15.2±0.20 ×13±0.20 ×6.4±0.20mm
  • 重さ: Approx. 3.8g

UART Ports

The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.

Product Picture