説明
1. Electronic limit switches
2. Automatic safety reverse
3. Manual release in case of power failure
4. Chain drive, belt drive, low noise
5. Power to lift the heaviest residential door.
6. Provides light for safe entry into the garage and to control lights from inside of garage and car
7. Provides a smoother operation and results in less wear and tear on the door, extending its life
8. Backup battery function (オプション)
9. For security, rolling code format changes entry code each time remote is used
10. LCD console to operate the garage door opener, shows time
TECHNICAL DATA:
INPUT VOLTAGE: 220/230V AC 50Hz
(110v AC 60Hz or 127V AC 60Hz available on request)
Single Phase
Current Required 1Amp
TRANSFORMER SEPC: Primary Voltage 220/230V AC
WORKING CIRCUMSTANCE: TEMPERATURE: -20ºC~55ºC
RELATIVE HUMIDITY: <90%
MOTOR SPEC: Motor Type Permanent Magnet D.C. モーター
Voltage 24V DC
Torque 150 kg.cm at 4 Amps
CONTROL BOARD SPEC: Relay Contact Rating 30 Amp / 30V DC
Relay Coil Voltage 24V DC
Control Board Voltage 24V DC / 5V DC
Light Glove Voltage 220v ac 15 watts Max.
Receiver specification Receiver type FSK AM
(Built-in) RF Frequency 433.92MHz
Code Storage Capacity 20Different codes
Control distance 50m max.
TRANSMITTER SPEC Carrier Frequency 433.92MHz
Current Consumption 50mA (約)
Battery Voltage 12 Volts A23 battery
Coding Format Hopping Code(7.38*1019 Combinations)