25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

מספר דגם.
SDT-25KW

Output Type
Triple

Circuit Topologies
Full-Bridge Type

Nature of Wave String
Sine Wave Inverter

סוּג
AC-DC-AC

Isolation Mode
Low Frequency Transformer

יְעִילוּת
>94%

לְהַצִיג
LCD+LED

Start Mode
Step Down Voltage Start and VFD

הֲגָנָה
Over Load, Short Circut, Under/ Overvoltage

DC Input
Optional

Monitoring(Optional)
RS485 Communication Port

חבילת הובלה
Wooden Box Packing with Pallet

מִפרָט
600*700*1080מ"מ(Width*Depth*Height)

סִימָן מִסחָרִי
SANDI

מָקוֹר
Zhejiang, חרסינה

קוד HS
8504403090

קיבולת ייצור
2000PCS/חודש

תיאור

תיאור מוצר

25KW 35KW 50KW 60KW 80KW 100KW 3 phases 400 volt 60hz to 3 phases 400 volt 50hz converter
25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

Power Phase Converter IntroductionSANDI SDT series Power Phase converter is one of the most advanced AC to AC conversion products in the world which can convert ordinary single-phase power to industrial three-phase power or converter 50hz to 60hz or 60hz to 50hz or converter voltage.It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, highefficiency, low no-load loss and no pollution.
The converter can supply AC power to all kinds of electric equipment, electric motors, pump, compressor, and other industrial power supply. Applicable to all types of load.

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

Technical Features

1) The input voltage, output voltage, frequency and phase can be custom made.

2) Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. VFD is especially used for taking 3 phase inductive load more easily. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

3) Output AC Power is suitable for all types of home appliances,electric tools, electric motors etc.

4) Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency andstable performance. It with powerful protection function for short circuit, over load, over temperature. Service life can reach 15-20 שנים.

5) Pure sine wave output. with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.

6) Adopted low frequency isolated transformer, safe and reliable, single phase input power is completely isolated from three phase output power, high conversion efficiency, high instantaneous power, stable performance and low load loss.

7) Adopts new magnetism material, largely reduce machine consumption, making efficiency maximum up to 98%.

8) Adopts America DSP chip, safe and reliable.

9) Adopts black pure aluminum radiator, which confirms the best radiating performance

10) Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the back end devices

11) Intelligent fan speed control system, low no-load loss

12) LCD display, high efficiency, easy installation

13) The output frequency 50Hz/60Hz can be set

פרמטרים של מוצר
דֶגֶם SDט-25KW
Isolation Low Frequency Transformer
AC Input Input rated voltage(VAC) 3 phase 400V/60הרץ(L1,L2,L3-N 230V. L1-L2-L3 400V)
Input rated current(א) 36א(phase current)
בput Frequency 60Hz±0.05Hz
AC Output Rated AC output power 25KW
AC output waveform Pure sine wave
Phases Three phase 4 wires + ground
Output rated voltage 400VAC ±3%(L1,L2,L3N 230V. L1-L2-L3 400V)
Output Frequency 50Hz±0.05Hz
Output rated current(א) 36א (phase current)
Power Factor(PF) >0.95
Overload Ability 150%, 10ס
הfficiency >94%
Waveform distortion rate (THD) <3%(Linear load)
Crest Factor (CF) 3:1
לְהַצִיג LCD
Electrical insulation properties 2500Vac, 1 Minute
Ambient temperature -15~+55ºC
Using environment humidity 0~90%,No condensation
הֲגָנָה Input under voltage, overvoltage, output over-current, short circuit, overheating וכו.
Structure Cooling method Fan-cooled
רַעַשׁ <40dB
Degree of protection IP20(indoor)
Using altitude(מ) ≤3000
דimensions (מ"מ) 700x600x1100מ"מ
מִשׁקָל (ק"ג) 250ק"ג
CE Standard EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

היתרונות שלנו

Our converter with many advantages on hardware and powerful functions, such as:
1. Adopted efficient Mitsubishi IPM intelligent module, with higher efficiency > 94% and stable performance.
2. It with powerful protection function for short circuit, over load, over temperature which is more safe and reliable.
3. Longer serive life > 15 שנים. Modular structure design very simple and easy for maintenance.
4. Built in low frequency isolation transformer, 100% full power output, can work 24h*7, suitable for all kinds of AC load.
5. Two kinds of start mode: Variable frequency start and Step down voltage start, with stronger capacity to drive inductive load.
6. Big LCD display, the output voltage and output frequency all can be set.
25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

Detailed Photos

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

Certifications

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

אריזה & מִשׁלוֹחַ

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

שאלות נפוצות

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter

SANDI Main Products

SANDI Main Products

25kw 35kw 50kw 60kw 80kw 100kw 3 Phases 400 Volt 60Hz to 3 Phases 400 Volt 50Hz Converter