La description
FDD-LTE2100Mhz Power Amplifier Module
BT-YF2110-60/U18D4250-X2
| Items | Downlink | Uplink |
| Frequency rang(MHz) | 2110-2170 | 1920-1980 |
| Sortir [Protégé par e-mail](25C) | 42±1dBm | |
| ALC | Output Power keep Max.Output Power±1.5dB @(20dB>Input signal increased>10dB) | |
| Gagner(25C) | ≤50±2dB | ≤18±2dB |
| Out of Band Rejection | Built-in SAW Filter | Built-in SAW Filter |
| Gain Adjustable rang | ≥30dB | |
| Step of Gain Adjustable | ≤1dB | |
| Error of Gain Adjustable | When Gain adjustable rang≤20dB Total error≤±1dB @ 0~20dB |
|
| When Gain adjustable rang>20dB Total error ≤ ±1.5dB @>20dB |
||
| EVM | ≤5%(r.m.s) | |
| Spurious Emission | Comply with 3GPP TS 25.106 V6.0.0 | |
| In Band Ripple | ≤3dB | |
| Frequency Error | ≤0.01ppm | |
| VSWR | ≤1.4 | |
| Noise Figure | ≤3 | |
| Group delay time | ≤1μs | |
| Max. Input Power no Damage | +10dBm(CW) | -10dBm(CW) |
| Source de courant | +28V; ≤2.3A | |
| Power amplifier efficiency | ≥25% | |
| Operating Temperature | -25~+55ºC | |
UN. POWER-6 Connector for Power Supply& Monitor,Pin definition:
PIN 1 –>RS485A;
PIN 2 –>RS485B;
PIN 3 –>GND;
PIN 4 –>GND;
PIN 5 –>NC;
PIN 6 –>+28V;
B. RF Connector: SMA-50KFD
C. Monitoring functions
- Module address(default=0, settable);
- PA setup function: PA=ON/OFF, ALC, ATT;
- PA Query function: Working status(on/off,input/output, Revers power, Température, VSWR, ATT, ALC, PA Input power,ou LNA output power), Alarm(over Temperature,VSWR, PA Fault);
- Over Temperature Alarm:Alarm threshold +85C, meanwhile switch off PA, When Temperature lower to +80C, switch on PA automatically.
- PA Fault Alarm: Low gain Alarm;
- Amplifier temperature detection: Temperature detection rang including but not limited -40C~+85C, Detection accuracy<±3ºC;
- PA Forward Power detection: Detect total power, Modulated signal test, detection rang 25dBm~46dBm, Detection accuracy<±2dBm;
- PA Revers Power detection: Detect total power, Modulated signal test detection rang 25dBm~46dBm, Detection accuracy<±2dBm;
- PA Input power detection: Detect total power, Modulated signal test detection rang-20dBm~4dBm, Detection accuracy<±2dBm;
- LNA Setup: ATT
- LNA Query: ATT
D. Dimensions
