Descripción
|
Tempereture switch 8S 8A Lifepo4 battery protection bms board with balance
1. About the bms Descripción: |
1. Descripción del producto
BMS Product feature:
About the battery BMS/PCB/PCM Función: Versión separada : Puerto separado para carga/descarga. Podemos personalizar cualquier PCB desde 1Baterías de litio S a 35S con diferente corriente..
|
- Descripción del efecto de la aplicación.
vehículo turístico,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……

About your products,just tell us the relative voltage/cells/current A or equipment etc,we will help to recommend the most suitable products for you.

| Mode | LWS-8S8A-112(8S) |
| PCM Size | L72.4*W65*T4 mm |
| battery series | 4S-8S Available |
| working current | 112A Available |
| Solicitud | luces LED, luces de emergencia, Equipos digitales, etc. |
| Muestra | available |

1. First connect the B- of the BMS to the total negative pole of the battery pack;
2.The cable starts from the thin black one connecting B-, the second red wire connects the positive pole of the first string of batteries, and the next string is connected in turn to positive pole of the battery,B-,B1,B2……B8; then insert the cable into the BMS;
(The maximum number of strings is 4-8 strings, the example picture is 8 strings) (Please weld the wires in order and avoid pseudo solder joints.)3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .

| PCM Specifications For 29.6V (8S) Li-ion Battery Packs | |||
| Modelo:LWS-8S8A-112(8S) | |||
| No. | Test item | Criterion | |
| 1 | Voltaje | Voltaje de carga | corriente continua:33.6V CC/CV |
| Balance voltage for single cell | 4.20±0.025V | ||
| 2 | Current | Balance current for single cell | 42±5mA |
| Current consumption | ≤50uA | ||
| Max continuous charging current | 4A | ||
| Max continuous Discharging current | 4A | ||
| 3 | Over charge Protection | Over charge detection voltage for single cell | 4.20V±0.025V |
| Over charge detection delay time | 0.5S-2S | ||
| Over charge release voltage for single cell | 4.10±0.05V | ||
| 4 | Over discharge protection | Over discharge detection voltage for single cell | 2.8V±0.0625V |
| Over discharge detection delay time | 100mS-800mS | ||
| Over discharge release voltage for single cell | 2.9±0.075V | ||
| 5 | Over current protection | Over current detection voltage | 150±25mv |
| Over current detection current | 8±1A | ||
| Detection delay time | 7.2ms-11ms | ||
| Release condition | Cut load,Automatic recovery | ||
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-500us | ||
| Release condition | Cut load,Automatic recovery | ||
| 7 | Resistencia | Protection circuitry(MOSFET) | ≤50mΩ |
| 8 | Temperatura | Operating Temperature Range | -40~+85ºC |
| Storage Temperature Range | -40~+125ºC | ||






3. Preguntas más frecuentes
|

