Descripción
7/8″ EIA Flange Connector for 7/8″ Foam Feeder (Flexible) Cable
(Contact attachment:Inner:captivated;Outer:clamp)
(Contact attachment:Inner:captivated;Outer:clamp)
| N º de Modelo. | 78EIA-J7/8A | |
| Interface | 7/8″ EIA Flange | |
| Eléctrico | ||
| Characteristic Impedance | 50ohm | |
| Rango de frecuencia | DC-5GHz | |
| VSWR | ≤[correo electrónico protegido], ≤[correo electrónico protegido], | |
| Dielectric Withstanding Voltage | ≥6000V RMS,50Hz,at sea level | |
| Voltaje de trabajo | ≤2100V RMS,50Hz,at sea level | |
| Dielectric Resistance | ≥5000MΩ | |
| Average Power | 2.3KW @900MHz | |
| Peak Power Maximum | 90KW | |
| Resistencia de contacto | Center Contact ≤1.5mΩ | Outer Contact ≤1.5 mΩ |
| Mecánico | ||
| Durability | Mating cycles ≥100 | |
| Material and Plating | ||
| Parts Name | Material | Plating |
| Body | Brass | Ni |
| Insulator | PTFE | – |
| Center conductor | Bronce fosforado | Ag |
| Coupling flange | Brass | Ni |
| Back nut | Brass | Ni |
| Gasket (O-ring) | Silicone Rubber | – |
| Cable Clamp | Brass | Ni |
| Hardware kits | Acero inoxidable | – |
| Environmental | ||
| Operating Temperature | -40ºC~+85ºC | |
| Weatherproof Rate | IP67 | |
| RoHs Compliant | sí | |
| Suitable Cable | Andrew LDF5-50,AL5-50,RFS LCF78-50;Leoni 7/8″R,Hansen 7/8″,Eupen EC5-50 | |
| Notas | It includes one coupling element(bullet). Hardware kits include:3 pieces of each bolt, nut, lock washer and flat washer. | |
