Descripción
1U Swing-Out Rack Mount Patch Panel (RPP-RP)
1U Swing-out rack mount patch panels are lightweight and robust patch panels. They are designed
for the installation of up to 24 standard optical fibers. The lower tray is designed to gain access to
preformed fiber and splice management areas, at the same time, make it easy for installation and
dressing of fiber optic cables.
Standards Compliance
. TIA/EIA 568.C, ISO/IEC 11801, ENS50173, IEC60304, IEC61754, EN297-1
. CEA/EIA-310-E (Cabinets, Racks, Panels and Associated Equipment standard.)
. ANSI/TIA/EIA-606-A (Administration Standard for Telecommunications Infrastructure. )
. GR-449-CORE (Generic Requirements and Design Consideration for Fiber Distributing Frames. )
. los 94 (Tests for Flammability of Plastic Material for Parts in Devices and Appliances. )
. RoHS (Directive on Restriction of Hazardous Substances. )
. TIA/EIA 568.C, ISO/IEC 11801, ENS50173, IEC60304, IEC61754, EN297-1
. CEA/EIA-310-E (Cabinets, Racks, Panels and Associated Equipment standard.)
. ANSI/TIA/EIA-606-A (Administration Standard for Telecommunications Infrastructure. )
. GR-449-CORE (Generic Requirements and Design Consideration for Fiber Distributing Frames. )
. los 94 (Tests for Flammability of Plastic Material for Parts in Devices and Appliances. )
. RoHS (Directive on Restriction of Hazardous Substances. )
Características
. Smooth and convenient mechanical Swing-Out system.
. Magnetic lock system ensures easy closing/opening.
. Cable entry from the rear and sides.
. cable storage and protection.
. 1U rackmount can be loaded with up to 2 Short adapter plates (6-, 8-, o 12- fiber panels).
. Can load SC, FC, ST, LC adapter, only change the different plates.
. Smooth and convenient mechanical Swing-Out system.
. Magnetic lock system ensures easy closing/opening.
. Cable entry from the rear and sides.
. cable storage and protection.
. 1U rackmount can be loaded with up to 2 Short adapter plates (6-, 8-, o 12- fiber panels).
. Can load SC, FC, ST, LC adapter, only change the different plates.
Especificaciones
| Patch Panel | Adaptor | ||
| Tamaño(H×W×D )milímetro | 1U(H) x 19″(W) x 314mm(D) | Multimode Insertion Loss | 0.2dB Maximum |
| Material | 1.2mm Cold Rolled Steel | Singlemode Insertion Loss | 0.2dB Maximum |
| Material Coating | Powder | Mating durability | >500 Mating Cycles |
| Humidity | 0-90%, non-condensing | Multimode Adaptor Wavelength | 850 to 1300nm |
| Operating Temperature | -10°C to 60°C | Singlemode Adaptor Wavelength | 1310 to 1550nm |
| Storage Temperature | -40°C to 85°C | ROHS Compliant | sí |
Ordering Information
Using the available configurations amend/create product codes using the formula below.
Part Number: XX-Automóvil club británico–BBC(DmiF)
Ordering Guide
Using the available configurations amend/create product codes using the formula below.
Part Number: XX-Automóvil club británico–BBC(DmiF)
Ordering Guide
| XX | patch panel Type | WPP=wall mount patch panel, RPP=rack mount patch panel |
| Automóvil club británico | Product ID | RP |
| BB | Port Capacity | 012=12 Ports, 018=18 Ports, 024=24 Ports, 036=36 Ports |
| C | configuration | mi=only patch pane, L=With Adapter Panels, F=With Adapter Panels and Pigtails |
| D | Connector Type | FP,SP,SA,LP |
| mi | Fiber Type | OM1=62.5/125 OM1, OM2=50/125 OM2, OM3=50/125 OM3, OM4=50/125 OM4, G652D=9/125 G652D, G657A=9/125 G657A |
| F | Fiber Length | 05=0.5M, 10=1M, 20=2M |
Connector Type Code
| Código | Conector | Código | Conector | Código | Conector | Código | Conector |
| FP | FC/PC | FA | FC/APC | LP | LC/PC | LA | LC/APC |
| SP | SC/PC | SA | SC/APC | TP | ST/PC | TA | ST/APC |
| MU | MU | DN | DESDE | MT | MTRJ | E2 | E2000 |
Ordering Sample
| Part Number | Descripción |
| RPP-RP–mi | 1U RPP-RP Type Swing-out Rack Mount Patch Panel without adaptor plate and pigtail. |
| RPP-RP–24FSPG652D10 | 1U 24 Fibers RPP-RP Type Rack Swing out Mount Patch Panel With Duplex SC/PC SM Adapter and 1M Singlemode G652D SC/PC Pigtail. |
