Περιγραφή
περιγραφή προϊόντος :
Installation is as easy as strip, clean, cleave cam and crimp.
Feature:
1. Low insertion loss
2.Low PDL
5.Wide Operating Temperature:From -40ºC to 85ºC
6.High Reliability and Stability
Εφαρμογές :
1.Fiber to the point (FTTX)
2.Fiber to the home (FTTH)
3.Passive optical networks(PON, GEPON)
4.Local area networks (LAN)
5.Cable television (CATV)
6.Test equipment
Inspection:
| Είδος | Parameters | Είδος | Parameters |
| Mode | Single mode | Cladding Dia | 250 um |
| Cable Scope | 3.0×2.0 Bow type Cable | Fiber Dia | 125 um |
| Operating time | about 15s | Insertion loss | ≤0.25dB |
| Return loss | ≤-40dB | Continuous success rate | >98% |
| Assebly times | >10 φορές | Bare fiber tightening force | >5N |
| Tensile strength | >50N | Εύρος θερμοκρασίας | -40~+85ºC |
| Online stretching resistance test(30N) | IL≤0.3dB | Mechanical endurance (500 φορές) | IL≤0.3dB |
| Fall-down test(on cement floor at height 4m/each direction one time/total three times |
IL≤0.3dB | Εφαρμογή | FTTH/FTTX/FTTB |
Component list:
Back cover opening tool
Optical fiber connector back cover
Optical fiber connector body
Pin protection cap
Optical fiber connector protective jacket
Installation Notes :
For optical cable stripping, use sheathed cable stripping pliers to strip the sheathed cable with a length of about 60mm;
Use Miller pliers to peel off the 0.25mm coating, leaving about 24mm;
Wipe clean with absolute alcohol;
Use a fiber cleaver to cut the fiber, leaving a length of about 48mm;
Fiber positioning and fixing :
1. Screw the edge of the pin protection cap tightly and open the back cover of the optical fiber connector;
2. Use the back cover opening tool to buckle in and push forward according to the direction shown in the figure;
3. Insert the stripped optical cable into the guide hole in the middle;
4. When the outer sheath of the optical cable reaches the fixed teeth, tilt the optical cable by 30-45°;
5. Continue to push the optical cable until the core touches the ferrule protective cap;
6. Press the outer sheath of the optical cable into the tooth-shaped groove, and ensure that the optical fiber has a small amount of slight bending;
7. Close the back cover to ensure that both sides of the back cover are reliably locked;
8. Pull out the back cover opening tool; pull out the pin protection cap while screwing it.
Related Products 
Company 
Transport
FAQ
1. Can you provide free samples for us?
Ναί, of course, we can provide the samples for our estimated costumers, but the shipping cost should be on your account.
2.Your company can be do the OEM or ODM product?
Σίγουρος, we can, also we can do the OEM of the package and so on.
3.What’s the MOQ for your products?
It’s ok to 1pcs.
4.What is your payment way?
T/T, L/C, Western Union
5. How do you ship the goods and how long does it take to arrive?
We usually ship by DHL, Σκαμπανεβάσματα, FedEx or TNT international express service. It usually takes 4-7working days to arrive. Airline and sea shipping also optional.