DC Current Input Signal Converter Isolator Analog Output Sensor

Περιγραφή

DC current input signal converter isolator analog output sensor

Isolates and converts DC current signals into standard analog signals and transmits them to PLC, DCS, and display instruments, which can provide 24VDC power distribution for two-wire instruments
DIN rail independent installation method; high-efficiency, high linearity, low temperature drift, και τα λοιπά.

Technical Parameters

Input Terminal:
Input Signal	4-20mA;0-20mA;0-1ΕΝΑ;0-5ΕΝΑ,0-10ΕΝΑ,-100mA~+100mA,-1A~+1A,others
Distribution voltage	24V,(Maximum driving current 30mA)
Input Resistance	≤50Ω
Output Terminal:
Output Signal	4-20mA;0-20mA;0-5V;0-10V,others
Output load resistance	RL≤500Ω( output is a current signal) RL≥10KΩ( output is a voltage signal)
Basic parameters:
Power Supply	DC24V,DC12V
Consumption current	≤50mA(1in 1out, power input, 20mA output) ≤70mA(1in 2 out, power input, 20mA output)
Temperature drift	0.005%F.S/ºC (-20ºC~+55ºC)
Temperature drift	≤10mS(0-90%)(TYP)
Insulation grade	1500V AC/1min(Between input, output, power)
Αντοχή μόνωσης	≥100MΩ(Between input, output, power)
Working Temperature	-20~+55ºC
EMC	Conform GB/T 18268(IEC61326-1)
Εφαρμόσιμος	Two-wire, three-wire transmitter; current source

Product Model Τραπέζι

HDH-22	–	Χ	Χ	Περιγραφή
Channel configuration	1			1 in 1 out
	2			1 in 2 out
Input Signal		1		4-20mA
		2		0-20mA
		3		0-1ΕΝΑ
		4		0-5ΕΝΑ
		5		0-10ΕΝΑ
		6		-100mA~+100mA
		7		-1A~+1A
		S		others
Output Signal			1	4-20mA
			2	0-20mA
			4	0-5V
			6	0-10V
			S	others
Note: The customer needs to determine the input and output signals when ordering, and can be customized if there are special needs.

Selection example:HDH-22-XXX
Eg:HDH-22-111 1 in 1 out,both input and output are 4-20mA,24VDC power supply

Προϊόντα

Company information

Σχετικά προϊόντα