Beschreibung
high quality alarm wire for security alarm system
1)Structure: Unshielded, shield
EIN> Conductor: CCA (TC, BC, TCCA are available)
B> Cable core: 2C, 4C, 6C, 8C, 10C, 12C, 14C, 16C, 20C
C> Insulation: PVC
D> rip cord: Jawohl
E> Shield: Al/foil
F> Drain wire: Nein
G> Jacket: PVC
2)Anwendung:
These cables are used for installation in signaling and alarm system.
This is suitable for the connection of contacts, detectors and sensors,
Infra-red as well as micro wave or mixed technology systems to the switch board.
3) More type
| Typ | Normal Area (mm2) |
Spezifikationen (mm) |
Insulation Dia (mm) |
Außendurchmesser. (mm) |
| Unscreened | 2×0.22 | 2×7/0.20 | 1.0 | 3.2 |
| Unscreened | 4×0.22 | 4×7/0.20 | 1.0 | 3.7 |
| Unscreened | 6×0.22 | 6×7/0.20 | 1.0 | 4.3 |
| Unscreened | 8×0.22 | 8×7/0.20 | 1.0 | 4.6 |
| Unscreened | 10×0.22 | 10×7/0.20 | 1.0 | 5.4 |
| Unscreened | 12×0.22 | 12×7/0.20 | 1.0 | 5.6 |
| Unscreened | 14×0.22 | 14×7/0.20 | 1.0 | 5.8 |
| Unscreened | 16×0.22 | 16×7/0.20 | 1.0 | 6.1 |
| Unscreened | 18×0.22 | 18×7/0.20 | 1.1 | 6.5 |
| Unscreened | 20×0.22 | 20×7/0.20 | 1.1 | 6.8 |
| Unscreened | 30×0.22 | 30×7/0.20 | 1.1 | 8.5 |
| Unscreened | 40×0.22 | 40×7/0.20 | 1.1 | 10 |
| Screened | 2×0.22 | 2×7/0.20 | 1.1 | 3.4 |
| Screened | 4×0.22 | 4×7/0.20 | 1.1 | 3.9 |
| Screened | 6×0.22 | 6×7/0.20 | 1.1 | 4.5 |
| Screened | 8×0.22 | 8×7/0.20 | 1.1 | 4.8 |
| Screened | 10×0.22 | 10×7/0.20 | 1.1 | 5.6 |
| Screened | 12×0.22 | 12×7/0.20 | 1.1 | 5.8 |
| Screened | 14×0.22 | 14×7/0.20 | 1.1 | 6.1 |
| Screened | 16×0.22 | 16×7/0.20 | 1.1 | 6.5 |
| Screened | 18×0.22 | 18×7/0.20 | 1.1 | 6.9 |
| Screened | 20×0.22 | 20×7/0.20 | 1.1 | 7.3 |
| Screened | 30×0.22 | 30×7/0.20 | 1.1 | 8.9 |
| Screened | 40×0.22 | 40×7/0.20 | 1.1 | 10.8 |
4)Electrical Charateristics
| Conductor Resistance: | <125ohms/km |
| Resistance Unbalance: | <2.5% |
| Dielectric Strength DC: | 2000V/1min |
| Insulation Resistance: | >3000Mohms-km |
| Impedance: | 100ohms+/-10% |
| Mutual Capacitance: | <100nF/[email protected] |
5)Physical Properties
| Conductor tensil strength: | >245Mpa |
| Conductor Elongation: | >10% |
| Insulation tensil strength: | >10Mpa |
| Insulation Elongation: | >200% |
| Insulation Hot shrinkage: | <5% |
6) Workshop