Beskrivelse
25KW 35KW 50KW 60KW 80KW 100KW 3 phases 400 volt 60hz to 3 phases 400 volt 50hz converter
Power Phase Converter IntroductionSANDI SDT series Power Phase converter is one of the most advanced AC to AC conversion products in the world which can convert ordinary single-phase power to industrial three-phase power or converter 50hz to 60hz or 60hz to 50hz or converter voltage.It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, highefficiency, low no-load loss and no pollution.
The converter can supply AC power to all kinds of electric equipment, electric motors, pump, compressor, and other industrial power supply. Applicable to all types of load.
Technical Features
1) The input voltage, output voltage, frequency and phase can be custom made.
2) Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. VFD is especially used for taking 3 phase inductive load more easily. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
3) Output AC Power is suitable for all types of home appliances,electric tools, electric motors etc.
4) Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency andstable performance. It with powerful protection function for short circuit, over load, over temperature. Service life can reach 15-20 flere år.
5) Pure sine wave output. with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.
6) Adopted low frequency isolated transformer, safe and reliable, single phase input power is completely isolated from three phase output power, high conversion efficiency, high instantaneous power, stable performance and low load loss.
7) Adopts new magnetism material, largely reduce machine consumption, making efficiency maximum up to 98%.
8) Adopts America DSP chip, safe and reliable.
9) Adopts black pure aluminum radiator, which confirms the best radiating performance
10) Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the back end devices
11) Intelligent fan speed control system, low no-load loss
12) LCD display, high efficiency, easy installation
13) The output frequency 50Hz/60Hz can be set
| Model | SDT-25KW | |
| Isolation | Low Frequency Transformer | |
| AC Input | Input rated voltage(VAC) | 3 phase 400V/60Hz(L1,L2,L3-N 230V. L1-L2-L3 400V) |
| Input rated current(EN) | 36EN(phase current) | |
| Input Frequency | 60Hz±0.05Hz | |
| AC Output | Rated AC output power | 25KW |
| AC output waveform | Pure sine wave | |
| Phases | Three phase 4 wires + ground | |
| Output rated voltage | 400VAC ±3%(L1,L2,L3 – N 230V. L1-L2-L3 400V) | |
| Output Frequency | 50Hz±0.05Hz | |
| Output rated current(EN) | 36EN (phase current) | |
| Power Factor(PF) | >0.95 | |
| Overload Ability | 150%, 10s | |
| Efficiency | >94% | |
| Waveform distortion rate (THD) | <3%(Linear load) | |
| Crest Factor (CF) | 3:1 | |
| Display | LCD | |
| Electrical insulation properties | 2500Vac, 1 Minute | |
| Omgivelsestemperatur | -15~+55ºC | |
| Using environment humidity | 0~90%,No condensation | |
| Beskyttelse | Input under voltage, overvoltage, produktion over-current, short circuit, overheating etc. | |
| Structure | Cooling method | Fan-cooled |
| Noise | <40dB | |
| Degree of protection | IP20(indoor) | |
| Using altitude(m) | ≤3000 | |
| Dimensions (mm) | 700x600x1100mm | |
| Vægt (Kg) | 250Kg | |
| CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | |
Our converter with many advantages on hardware and powerful functions, som f.eks:
1. Adopted efficient Mitsubishi IPM intelligent module, with higher efficiency > 94% and stable performance.
2. It with powerful protection function for short circuit, over load, over temperature which is more safe and reliable.
3. Longer serive life > 15 flere år. Modular structure design very simple and easy for maintenance.
4. Built in low frequency isolation transformer, 100% full power output, can work 24h*7, suitable for all kinds of AC load.
5. Two kinds of start mode: Variable frequency start and Step down voltage start, with stronger capacity to drive inductive load.
6. Big LCD display, the output voltage and output frequency all can be set.
SANDI Main Products
