وصف
Industrial Powerline Ethernet Bridge
Wide Voltage(150V-630V)
WD-1001M-DIN(HV3)
Overview
WD-1001M-DIN(HV3) industrial powerline ethernet bridge is an industrial powerline communication product developed by Kunshan Wondertek Technology Co., Ltd. The product adopts the ITU-T G.9960 G.hn communication protocol standard, has been widely used in intelligent manufacturing, intelligent building, intelligent city street lamp, intelligent electricity meter, solar panel monitoring, communication in dangerous environment, maritime applications, automotive applications, aerospace applications, railway, mining, intelligent storage, intelligent sorting, Automatic garage and other wired or sliding contact line and many other sites.
Packet loss:≤0.1%(100م,حمولة 70%)
الدعم 7*24 hours all weather operation;
Hardware watch dog function;
Low delay communication
Wide voltage input
NDIM (Near Field Interference)
3.1 Technical parameters
- يدعم ز.حn protocol standard.
- Industrial DIN standard installation or fixed installation method.
- rate adaptive.
3.2 أdministrative
- Remote Firmware Update (TR069).
- 802.3D Ethernet Bridge.
- 802.1Q VLAN.
- Quality of Service(QoS) .
- IGMO(IPv4)Snooping&MLD(IPv6)Snooping
3.3 The work environment
- The working temperature of the working environment is -40ºC-85ºC.
- Operating environment Operating temperature :10%-85% non-condensing state Preservation humidity 5%-90% non-condensing state.
3.4 Design criteria
- ITU-T G.9960
- IEC 60529
- IEC 50022
- IEC 60068-2-6
3.5 تخصيص
| Interface | 1*LAN 10/100/1000Base-TX self Adaption RJ45,MDI/MDX |
| Operating voltage range | AC150-630V/DC200-890V |
| LED display Light | Ethernet PLC قوة |
| Transfer frequency | 2-50MHz and MIMO |
| Protocol(PHY) | ITU-T G.9960 (G.hn) IEEE802.3,IEEE802.3x, IEEE802.3u |
| Security | 128-AES |
| Transfer rate(PHY) | 1000Mbps |
| Number of each Group | 7 |
| Modulation | OFDM |
| Effective transfer rate | TCP/IP 500Mbps |
| Manageability | Remote Firmware update,يدعم TR-069(optional) |
| 802.1D Ethernet Bridge | |
| 802.1Q VLAN | |
| Quality of Service(QoS) | |
| درجة حرارة التشغيل | -40درجة مئوية-85درجة مئوية |
| وزن | حول 0.30كلغ |
| Operating environment | Operating humidity:10%-85%(no condense) Storage humidity: 5%-90% (no condense) |
| شهادة | لجنة الاتصالات الفيدرالية,CE class B,WEEE,بنفايات |
| Transmission distance | 800م الأعلى |
| Transmission lines | Three-wire transmission MIMO مode |
3.6 Immunity Of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 ق.
According to B/T 17626.2-2006.
3.7 Immunity of هlectrical Fast تransient أناmpulse زroup(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5كيلوهرتز;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
3.8 Anti أناnterference of سurge أناmpact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
3.9 Anti- الخامسibration
Meet the demand of MX3 in TB1433(0-200هرتز,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
4. اتصال تopology دiagram
5. Mounting دimension دrawing
