وصف
GP7000 is a 4G vehicle positioning terminal, all metal fashion shell, external antenna signal is super strong, accurate positioning, with blind spot inflection point supplementary transmission, entry and exit area monitoring alarm, overspeed alarm, main power failure alarm, oil and power failure and other functions, and can be externally connected Oil level sensing.
Please contact me for more information
|
Parameters
|
وصف
|
|
Parameters
|
وصف
|
|
البعد( L x W x H )
|
74*55*24mmv
|
|
وزن
|
300ز(Including standard accessories)
|
|
Shell material
|
All metal
|
|
Built-in battery
|
3.7V 180mAh
|
|
درجة حرارة العمل
|
-20ºC ~ 75ºC
|
|
درجة حرارة التخزين
|
-40ºC ~ 85ºC
|
|
Relative humidity
|
5%~95%
|
|
جهد العمل
|
DC 9~36V
|
|
Average sleep current
|
|
|
Average working current
|
|
|
GNSS/Cellular module antenna
|
external
|
|
Positioning error
|
< 10 meters
|
|
Cellular Communication Module
|
2ز: 850/900/1800/1900
4ز:CAT1:B1/B3/B5/B8 B34/B38/B39/B40/B41 |
|
SIM card
|
Mini -SIM card
|
|
Communication method
|
TCP/UDP
|
|
Main Functions
|
Function Description
|
|
Based on 2G/4G network communication
|
نظام تحديد المواقع + cell code positioning + WIFI positioning
|
|
Real-time location
|
Query real-time vehicle status
|
|
real time monitoring
|
The monitoring time interval can be set according to customer requirements
|
|
Blind area supplementary transmission
|
The terminal is located and not online, and the data is stored, up to 300. Upload when there is a signal to go online normally.
|
|
Status (version) query
|
The platform can remotely query terminal status (version) information
|
|
Mileage setting
|
Set the initial value of mileage
|
|
vehicle terminal Remote upgrade through software
|
Upgrade butler remote upgrade
|
|
Antenna open circuit alarm
|
If the GPS antenna is not connected, the GPS antenna open circuit alarm will be reported
|
|
Overspeed alarm
|
The platform sets the maximum speed limit value. When the GPS speed is greater than the set value, it will report an overspeed
alarm |
|
Low voltage alarm
|
An alarm is generated when the main power voltage is lower than 10V
|
|
Main power failure alarm
|
An alarm is generated when the main power voltage is lower than 5V
|
