وصف
20dBm 70db Triple Band Mobile Signal Repeater
Certification CE0700 and RoHS
| What is a signal booster? |
| A signal booster is a wireless signal relay transmission device that helps to extend the cellular coverage footprint in areas of weak or poor coverage. |
وصف:
The booster system series are designed for indoor signal coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market,office,building…
It can support any dual band system of CDMA450,TETRA,CDMA,IDEN,EGSM,GSM,DCS, أجهزة الكمبيوتر,WCDMA,AWS,LTE.
The repeater improves indoor cellphone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.You can get a better call experience and faster data download speed,while can save your phone battery life.
Coverage:
800-2000sq. M coverage.
سمات:
1. Elegant and Compact design,good isolation and heat dissipation for long time operation.
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Limit output power for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Wide input power range,low power consumption.
6. With good IMD3,it can have more antennas for covering without affect towers.
7. Intermediate IF SAW filter technology,good out of band rejection,amplify only specific your required signals and reject all the others.
8. Output power can be from 10dbm to 30dbm and gain can be 60db to 85db,band can be full band,band selective or industrial standard.
RF Repeater Typical Application:
تحديد:
| RF Specifications | |||
| Items | تحديد | ||
| Uplink | Downlink | ||
| Frequency Range | CDMA450 | 452.5 ~ 457.5MHz | 462.5 ~ 467.5MHz |
| CDMA850 or LTE | 824 ~ 849MHz | 869 ~ 894MHz | |
| GSM900 or LTE | 890 ~ 915 ميغاهيرتز | 935 ~ 960 ميغاهيرتز | |
| EGSM900 or LTE | 880 ~ 915 ميغاهيرتز | 925 ~ 960 ميغاهيرتز | |
| DCS1800 or LTE | 1710 ~ 1785 ميغاهيرتز | 1805 ~ 1880 ميغاهيرتز | |
| PCS1800 or LTE | 1850 ~ 1910 ميغاهيرتز | 1930 ~ 1990 ميغاهيرتز | |
| WCDMA2100 or LTE | 1920 ~ 1980 ميغاهيرتز | 2110 ~ 2170 ميغاهيرتز | |
| AWS2100 or LTE | 1710 ~ 1755 ميغاهيرتز | 2110 ~ 2155 ميغاهيرتز | |
| LTE | 698 ~ 716MHz | 728 ~ 746MHz | |
| 746 ~ 757MHz | 776 ~ 787MHz | ||
| 791 ~ 821MHz | 832 ~ 862MHz | ||
| 2500 ~ 2570 ميغاهيرتز | 2620 ~ 2690 ميغاهيرتز | ||
| as developed | |||
| IDEN800 | 806MHz ~ 821MHz | 85lMHz ~ 866MHz | |
| TETRA | 380 ~ 385MHz (or customized) |
390 ~ 395MHz (or customized) |
|
| Gain | ET-CR20T-F | ≥ 65dB | ≥ 70dB |
| طاقة الإخراج | ET-CR20T-F | ≥ 13dBm | ≥ 20dBm |
| Band width | Wide Band | ||
| MGC ( Step Attenuation ) | ≥ 31dB / 1dB step | ||
| Automatic Level Control | ≥ 31dB | ||
| Gain Flatness | ≤3-5dB(P-P) depend on the frequency and bandwidth | ||
| Noise Figure | ≤6dB | ||
| VSWR | ≤1.6 | ||
| Group Delay | ≤6μs | ||
| Frequency stability | ≤0.01ppm | ||
| Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 | ||
| WCDMA Meet 3GPP TS 25.143 ( الخامس 6.2.0 ) | |||
| CDMA Meet IS95 & CDMA2000 | |||
| MTBF | >50000 ساعات | ||
| استهلاك الطاقة | < 25دبليو | ||
| مزود الطاقة | Input AC90~264V,output DC10V / 6أ | ||
| معاوقة | 50 أوم | ||
| المواصفات الميكانيكية | |||
| I /O Port | N-Female | ||
| درجة حرارة التشغيل | -25درجة مئوية ~ +55 درجة مئوية | ||
| Environment Conditions | IP40 | ||
| Dimensions | 270x240x55mm/10.6×9.4×2.2inch | ||
| وزن | ≤ 4.5Kg | ||