Description
| * 18 years profesional manufacture Armor-wrap Fiberglass Pipe Repair Bandage * FDA CE Certfication * OEM your size and backing * Various Colors for Choose * 7-15 Working Days for Delivery * Free Samples Offered for Test |
Description:
Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.
Our pipe repair bandage uses environmental friendly materials, and mainly used for Repair Oil , Gas & Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, ect.
| Name | Model | Size | Packing |
| Pipe Repair Bandage | PR002 | 50mm x 3.6m (2″ x 12´) | 10rolls x 10rolls/ctn |
| PR003 | 75mm x 3.6m (3″ x 12´) | 10rolls x 10rolls/ctn | |
| PR004 | 100mm x 3.6m (4″ x 12´) | 10rolls x 10rolls/ctn | |
| PR005 | 125mm x 3.6m (5″ x 12´) | 10rolls x 10rolls/ctn | |
| PR006 | 150mm x 3.6m (6″ x 12´) | 10rolls x 10rolls/ctn |
| Outstanding Advantages | Technical Data |
| v Catalyst: Water v Resin Makeup: Polyurethane v Heat Resistance: 180°C v Pressure: 450 PSI v Bonds: Copper pipe, PVC, polypipe, metal, fibreglass v Set Time: 20 – 30 minutes, sets under water v Chemical resistance: Most diluted chemicals and fuels |
♦ Useable life: …2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 minutes ♦ Full cure time: … 30minutes ♦ Shore D hardness: … 70 ♦ Tensile strength: … 30-35Mpa ♦ Tensile modulus: … 7.5Gpa ♦ Maximum service temperature: … 150°C ♦ Pressure resistance: … 450psi (Min wrapping 12 layers around cracked/leaking area) |
Fast Pipe Repairing Armor Wrap Tape Cable Connection Repair Bandage
| Industry | Area of use | Reason for use | |
| Steel Smelter Works |
Processing: blast furnaces, water, steam, waste product pipes |
Emergency repairs until shutdown |
|
| Steel Sheet & Coil Manufaturing |
Processing: Steam and water pipes |
Emergency repairs to burst pipes |
|
| Petroleum |
Oil, gas, water supply lines |
Emergency repairs to fuel, oil and gas lines during 24hr shift |
|
| Coal, Copper & Zinc Smelter |
Processing: blast furnaces, water, steam, sludge, slurry lines |
Emergency repairs |
|
| Sugar Mills |
Corrosive fluid lines, abrasive product pipes, general low pressure, water and steam lines |
Emergency repairs to corrosive, water, steam and abrasive lines |
|
| Aluminiume |
Processing Plant: boiler rooms, sludge, slurry, water, steam pipes |
Emergency repairs to sludge and chemical lines |
|
| Power Stations |
Ash transfer systems, pulverized fuel tubes, cooling water lines |
Emergency repairs to transfer systems and lines |
|
| Timber Mills |
Processing of wood paneling, ply and softwood |
Emergency repairs to chemical and water lines |
|
| Paper Manufacturing |
Pulp Mill |
Emergency repairs to chemical, water and waste lines |
|
| Motor Vehicle Manufacturing |
Production manufacturing plant |
Emergency repairs to leaking water and steam pipe |
|
1. Once the leaking area is identified, shut down relevant pipes or hoses immediately.
2. Prepare the surface by cleaning and roughening the pipe.
3. Put on enclosed latex gloves.
4. Apply Steel Putty to the leak site and mould.
5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds.
The entire contents must be used once the package is opened.
6. Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coverage.
It is important that the bandage is applied.
7. quickly as curing begins once it is taken out of the water.
8. Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.
Continue this action during and upon completion.
For best results, manufacturers recommend the completed application should be no less than 10mm in thickness. Please refer to the instructions for use on each bandage for a troubleshooting guide.
OEM service is available
Shipping:within 15 working days after payment
Company Profile:
Ansen Medical Technology Development Co., Ltd. was established in 2003, as a highly focused manufacturer and exporter of orthopedic casting tape and splint in accordance with International Certificates approved.. We collect all the materials, and machines and technology from the best suppliers worldwide, and hunt the best person with high qualified skills and experiences. Based on these conditions, we can provide the best products and services to our clients, lead this industry in domestic market for more than 18 years. Backed by our good reputation and rich experience, we have established a stable sales network with several global customers from Europe, America, and Asia.