Description
Size:65*56*18mm
| GPS MOUSE | GL-DY26 | ||||
| Receiving Frequency band | L1: 1575.42MHz | Receiving channel | 56CH | ||
| Direction | <0.5 Degrees | Rate | <0.1m/s | ||
| Timing accuracy | 30 ns | Reference coordinate system | WGS-84 | ||
| Maximum altitude | 50000M | Maximum speed | 500 m/s | ||
| Acceleration | <=4g | Tracking sensitivity | -162dBm | ||
| Capture the sensitivity | -160dBm | Standard clock pulse | 0.25Hz-1KHz | ||
| Location update rate | 1Hz-10Hz(default 1Hz) | The start up time | 32(typical) | ||
| UART/TTL port interface(default) | RS232 port interface(default) | Warm start time | 32(typical) | ||
| Hot start | 1(typical) | AGPS | 3s | ||
| Output | NMEA 0183 V3.0(GGA,GSA,GSV,RMC,VTG,GLL)protocol | ||||
| Electrical interface | Wide voltage range: the main power supply 3.3-5V, Owned RTC Power | ||||
| Data rate | 9600bps(default) (optional: 1200,2400,4800,19200,38400,57600,115200,230400,460800,921600) | ||||
| Cable long | 2m | C/A Code,1023MHz code stream | |||
| Positioning performance | <2.5M(Autonomous)(50%) <2M(SBAS) | ||||
Normal working conditions
| Parameters | Min | Standard | Max |
| The power supply voltage(V) | 3.3 | 5 | 5.5 |
| Working temperature(ºC) | -40 | — | 85 |
| Working current(mA) | 25 | 30 | 35 |
Extreme operating conditions
| Parameters | Min | Standard | Max |
| The power supply voltage(V) | -0.3 | — | 5 |
| The output voltage(V) | -0.3 | — | 3.6 |
| Working temperature(ºC) | -40 | — | 85 |
| Storage temperature(ºC) | -55 | — | 100 |
RTC Power supply conditions(RTC power module power,life time is about 2.5Hour)
| Parameters | Min | Standard | Max |
| RTC the power V supply voltage | 1.8 | 3.0 | 3.6 |
| Current consumption(Working)uA | — | 15 | — |
| Current consumption(Dormancy) | — | — | — |
Level digital interface
| Parameters | Min | Standard | Max |
| High level input voltage(V) | 2.0 | 2.8 | 3.3 |
| Low level input(V) | — | — | 0.8 |
| High level output(V) | 2.4 | 2.8 | 3.3 |
| Output low level(V) | — | — | 0.4 |
Connector DB 9 Pin Out:
Pin 1=+5 vDC Pin=2+GPS Tx Pin 3=GPS Rx Pin 5=GND
FAQ
Q: Can I get one sample?
A: Yes, sample is available.
Q: Have GNSS Antenna 100% assembles well in stock?
A: No, all GNSS antenna will be newly assembled according to your orders including the samples.
Q: What’s the delivery time?
A: 3-5 working days for the sample, 10-15 working days for quantity below 5K,.
Q: Could i use my own LOGO or design on goods?
A: Yes, customized logo and design on mass production are available.
Q: What’s the payment term?
A:T/T, Paypal, western union etc.
Q:May I visit your company?
A: Sure, welcome any time.
Q: How long of the warranty?
A: one year for antennas and half a year for assembly cables and connectors
